Filter
Top Products
Hardware Installation
The following items are connected externally to the system module:
■
keyboard (included with the system module)
■
AT&T VGA 329D color monitor or AT&T 324 monochrome monitor
The following devices may be connected to the system module:
■
External modem for remote support
■
AT&T 570/571 printer for report printing (AT&T 470/471 printers are
also supported).
■
Optional cartridge tape drive if AUDIX does not require a DCP
board
General Installation Instructions
Procedures are provided here for installing additional memory on the
motherboard and for installing circuit boards in the system module.
See Appendix A for information about installing a second hard drive.
If you need additional illustrations or details, see the installation guides
provided with each item.
Hardware installation requires the following tools:
■
a No.1 or No. 2 Phillips® screwdriver
■
a medium-width, flat-blade screwdriver
■
a 3/16-inch nut driver (recommended)
■
an antistatic grounded wrist strap
■
an antistatic grounded work mat
2-3