Filter
Top Products
Upgrade Procedures
e.
Remove the last disk from the disk drive.
An installation confirmation message appears.
The installation of the AUDIX Voice
Power Application Software R2.1.1:
Speech is now complete.
f. At the # prompt, type installpkg and press (Enter).
For systems with an installed tape drive:
— The system displays
Please indicate the installation
medium you intend to use.
Strike C to install from CARTRIDGE
TAPE or F to install from FLOPPY
disk.
Strike ESC to stop.
— Type f.
For systems with more than one floppy disk drive:
— The system displays
This system has two floppy drives.
Strike ENTER to install from drive
0 or 1 to install from drive 1.
— Type 1 and press (Enter) to select drive 1, or just
press (Enter) to select drive 0.
NOTE:
If the system configuration includes a tape drive or
multiple fIoppy disk drives, additional prompts may
appear. Use the preceding steps as a guide to
responding to the system prompts. The actual
prompts may vary depending on the system
configuration.
5-25