Filter
Top Products
Hardware Installation
4.
Pull the cover towards the front of the computer (the cover will
move about 1/2 inch). Then tilt the back of the cover up and
remove it. Take care not
or wires.
Opening the 6386E WGS
to catch the cover on any internal cables
Follow these steps to remove the cover:
1.
Be sure the system power is turned OFF. If any cables have been
connected to the system module, disconnect them.
2.
Unlock the cover lock. (A set of keys is provided with the system
module.)
3.
Remove the top cover of the system by lifting from the rear as
shown in Figure 2-2.
2-6