Filter
Top Products
Introduction
Check that the following software is included if you are doing a system
upgrade.
Description
Check
AUDIX Voice Power Upgrade Utility R1.0
(if you are upgrading from AUDIX Voice Power R1.1 )
AUDIX Voice Power Application Software, R2.0
(If you are upgrading from AUDIX Voice Power R1.1 )
NOTE:
For integrated System 75 and DEFINlTY G1 configurations only, a
DCP (or PC/PBX) board is required along with a port on a TN-754
board at the switch. If no existing port is available, an additional
TN-754 board must be installed in the switch.
For additional information, please see the AT&T AUDIX™ Voice Power
Switch Notes for your telephone switch.
System Diagram
Figure 1-1 is a representation of an AUDIX Voice Power system
configuration.
1-6