Filter
Top Products
Software Installation
11.
Select
Exit
and press [0].
12.
Press [F3] (CONT) to return to the UNIX operating system.
13. At the # prompt, type installpkg and press (Enter).
For systems with an installed tape drive:
— The system displays
Please indicate the installation medium
you intend to use.
Strike C to install from CARTRIDGE TAPE
or F to install from FLOPPY DISKETTE.
Strike ESC to stop.
— Type f.
For systems with more than one floppy disk drive:
— The system displays
This system has two floppy drives.
Strike ENTER to install from drive 0 or
1 to install from drive 1.
— Type 1 and press (Enter) to select drive 1, or just press
(Enter) to select drive 0.
NOTE:
14.
If the system configuration includes a tape drive or multiple
floppy disk drives, additional prompts may appear. Use the
preceding steps as a guide to responding to the system
prompts. The actual prompts may vary depending on the
system configuration.
Insert the Remote Terminal Package disk into the floppy disk drive
and press (Enter). (This is a UNIX system package that comes with
the UNIX Operating System Foundation Set).
3-38