Filter
Top Products
Recovering from System Failures
Restoring Speech Files
The voice system should be running before restoring files. Both the
administrative files and the speech files must be restored together. You
cannot restore the system without both.
CAUTION:
Be sure to remove all channels from service by changing their state
to MANOOS to prevent loss of data before beginning the restore
procedures. Refer to Changing the State of Voice Channels for
instructions.
To restore speech files, follow these steps:
1.
2.
3.
4.
5.
At the Restore from Removable Media menu, move the cursor to
Speech Restore
and press (Enter).
The Speech Restore menu appears.
At the Speech Restore menu, move the cursor to
Restore All
Talkfiles/Phrases
and press (Enter).
If you have more than one floppy disk drive or a cartridge tape
drive, the Select Removable Media menu appears. Make your
choice and press (Enter).
A restore confirmation message appears telling you to insert the
disk or tape containing files you want to restore.
Insert the disk or tape and press (Enter).
After the restore starts, the following message displays:
Restoring speech.
When the system informs you that it has completed the
restore, remove the cartridge tape or last disk and press (Enter).
Press [F6] (CANCEL) repeatedly to return to the AT&T
FACE menu.
6-7