Filter
Top Products
Configuration Testing and Troubleshooting
7. Press [F3] (SAVE) to begin execution.
The system searches for dial tones (Loop Current) on the boards
and then informs you if the IVP4 board passes the test. If the IVP4
board fails, you must replace the board. If neither dial tones nor
loop current is found, check the phone line connections.
8.
Press [F6] (CANCEL) repeatedly until the main FACE menu
appears.
9. Select
Exit
to return to the login prompt.
Application Operation Problems
This section assists you in identifying and locating problems that occur
with the application rather than with the hardware. If a symptom in the
“Trouble Indication” column occurs, check the solution given in the “User
Response” column.
If problems continue, contact a field service representative for assistance.
4-8