Filter
Top Products
Upgrade Procedures
9.
Install the Switch Integration package (if necessary) by following
this procedure:
NOTE:
If installing an integrated system, refer to the Switch Notes
document for your telephone system for additional
information.
a. At the # prompt, type installpkg and press (Enter).
For systems with an installed tape drive:
— The system displays
Please indicate the installation
medium you intend to use.
Strike C to install from CARTRIDGE
TAPE or F to install from FLOPPY
disk.
Strike ESC to stop.
— Type f.
For systems with more than one floppy disk drive:
— The system displays
This system has two floppy drives.
Strike ENTER to install from drive
0 or 1 to install from drive 1.
— Type 1 and press (Enter) to select drive 1, or just
press (Enter) to select drive 0.
5-27