Filter
Top Products
Hardware Installation
5. Use to move the highlight to Setup Utility and press
(Enter) .
— SETUP displays the current settings for the system on a
scrollable menu (6386/SX, 6386/25, and 6386E/33 WGS) or
on two pages (6386, 6386E WGS). The settings (except for
date, time, floppy disk drive, and hard disk drive) should be
similar to the following:
System Date
System Time
Base Memory Size
Base Memory Configuration
Extended Memory
Floppy Drive A:
Floppy Drive B:
Hard Disk #1
Hard Disk #2
80387 Numeric Coprocessor
3167 Numeric Coprocessor
Video Display
Keyboard
System Serial Port #1
System Serial Port
#2
ROM BIOS Map Address
Speaker:
Redirect Corn 1:
Redirect Corn 2:
CPU Speed
Shadow
RAM Control
Cache Control
Power-on Memory Test
Parallel Port
11-27-98 Mon
10:52:59
640
kB
All Enabled
3072 kB
3.5 inch, 1.44 MB
Not Present
ESDI - 142 MB
Not Present
Not Present
Not Present
EGA
or VGA
Present
Enabled as Com 1
Disabled
1 MB Only
On
Disabled
Disabled
Fast
Disabled
Enabled
On
Enabled as LPT1
You may find it necessary to modify the Extended Memory,
System Serial Port #2,
and Shadow RAM Control entries.
You should also set the correct date and time.
2-57