Filter
Top Products
Upgrade Procedures
— Type 1 and press (Enter) to select drive 1, or just
press (Enter) to select drive 0.
NOTE:
If the system configuration includes a tape drive or
multiple floppy disk drives, additional prompts may
appear. Use the preceding steps as a guide to
responding to the system prompts. The actual
prompts may vary depending on the system
configuration.
c.
Insert disk 1 of the AUDIX Voice Power Application Software
R2.1.1:Speech into the floppy disk drive and press (Enter).
NOTE:
The Speech section of the application software must
be installed before the Software section.
d. For each additional disk, insert the disk into the floppy disk
drive and press (Enter) as prompted by the system.
After all disks have been entered, the
display.
Waiting 10 seconds for
processes to start up.
following messages
necessary
Erasing any existing phrases supplied
by AUDIX Voice Power to make room for
new ones .
(Any previously saved voice
mail,
names, greeting, or custom
prompts WILL be preserved.)
You will now see a series of .'s.
Each .
indicates that a phrase has been
added to the speech database.
Please wait.
You may now remove the disk.
5-24