Filter
Top Products
Appendix A: Installing a Second Hard Disk
Installing the Second Hard Disk
The procedure for installing the second hard disk is outlined below. The
exact procedure for each step is included in the step or described
elsewhere in this document.
1.
If this is a new installation and installation has not yet been
completed, skip this step. Otherwise, use the Backing Up
Administrative Files procedure found in Chapter 5 to back up all
files in the following directories:
/usr/vmdb
/usr/ocdb
/avp/data
/gendb
2.
If this is a new installation and installation has not yet been
completed, skip this step. Otherwise, use the Backing Up Speech
Files procedure found in Chapter 5 to back up the following speech
files:
talkfile 46 phrase all
talkfile 47 phrase all
3.
Install the second hard disk. Follow the instructions packed with the
disk or in the appropriate Service Manual.
4.
Change the setup parameters to indicate that there are two hard
disks. Use the Configuration: the Setup Utility procedure in
Chapter 2 and change the entry for
Hard Disk
#2
to match the
entry for
Hard Disk #l.
(Both should be 300 MB disks.)
A-2