Filter
Top Products
M400E Ozone Analyzer Operator’s Manual Basic Operation of the M400E Analyzer
6.4.1. SETUP CFG: CONFIGURATION INFORMATION
Pressing the CFG key displays the instrument’s configuration information. This display lists the analyzer model,
serial number, firmware revision, software library revision, CPU type and other information.
Special instrument or software features or installed options may also be listed here.
Use this information to identify the software and hardware installed in your Model 400E photometric
analyzer when contacting customer service.
To access the configuration table, press:
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE EXIT
SETUP X.X M700E Cailbrator
PREV NEXT EXIT
Press exit at
any time to
return to the
SETUP menu
Press NEXT of PREV to move back and
forth through the following list of
Configuration information:
MODEL TYPE AND NUMBER
PART NUMBER
SERIAL NUMBER
SOFTWARE REVISION
LIBRARY REVISION
iCHIP SOFTWARE REVISION (Only
appears if INET option is installed)
CPU TYPE & OS REVISION
DATE FACTORY CONFIGURATION
SAVED
SAMPLE RANGE=500.0 PPB O3= XXXX
<TST TST> CAL SETUP
04315 Rev. C1 65