Renesas R5S72643 Doll User Manual


  Open as PDF
of 2152
 
Section 11 Multi-Function Timer Pulse Unit 2
Page 482 of 2108 R01UH0134EJ0400 Rev. 4.00
Sep 24, 2014
SH7262 Group, SH7264 Group
11.3.13 Timer Start Register (TSTR)
TSTR is an 8-bit readable/writable register that selects operation/stoppage of TCNT for channels 0
to 4.
When setting the operating mode in TMDR or setting the count clock in TCR, first stop the TCNT
counter.
Bit:
Initial value:
R/W:
7654321
0
00000000
R/W R/W R R R R/W R/W R/W
CST4 CST3 - - - CST2 CST1 CST0
Bit Bit Name
Initial
Value R/W Description
7 CST4 0 R/W Counter Start 4 and 3
These bits select operation or stoppage for TCNT.
If 0 is written to the CST bit during operation with the
TIOC pin designated for output, the counter stops but
the TIOC pin output compare output level is retained. If
TIOR is written to when the CST bit is cleared to 0, the
pin output level will be changed to the set initial output
value.
0: TCNT_4 and TCNT_3 count operation is stopped
1: TCNT_4 and TCNT_3 performs count operation
6 CST3 0 R/W
5 to 3 All 0 R Reserved
These bits are always read as 0. The write value should
always be 0.
2 CST2 0 R/W Counter Start 2 to 0
These bits select operation or stoppage for TCNT.
If 0 is written to the CST bit during operation with the
TIOC pin designated for output, the counter stops but
the TIOC pin output compare output level is retained. If
TIOR is written to when the CST bit is cleared to 0, the
pin output level will be changed to the set initial output
value.
0: TCNT_2 to TCNT_0 count operation is stopped
1: TCNT_2 to TCNT_0 performs count operation
1 CST1 0 R/W
0 CST0 0 R/W