Renesas R5S72643 Doll User Manual


  Open as PDF
of 2152
 
Section 11 Multi-Function Timer Pulse Unit 2
Page 466 of 2108 R01UH0134EJ0400 Rev. 4.00
Sep 24, 2014
SH7262 Group, SH7264 Group
11.3.4 Timer Interrupt Enable Register (TIER)
The TIER registers are 8-bit readable/writable registers that control enabling or disabling of
interrupt requests for each channel. This module has six TIER registers, two for channel 0 and one
each for channels 1 to 4.
TIER_0, TIER_1, TIER_2, TIER_3, TIER_4
76543210
Bit:
Initial value:
R/W:
00000000
R/W R/W R/W R/W R/W R/W R/W R/W
TTGE TTGE2 TCIEU TCIEV TGIED TGIEC TGIEB TGIEA
Bit Bit Name
Initial
Value R/W Description
7 TTGE 0 R/W A/D Converter Start Request Enable
Enables or disables generation of A/D converter start
requests by TGRA input capture/compare match.
0: A/D converter start request generation disabled
1: A/D converter start request generation enabled
6 TTGE2 0 R/W A/D Converter Start Request Enable 2
Enables or disables generation of A/D converter start
requests by TCNT_4 underflow (trough) in
complementary PWM mode.
In channels 0 to 3, bit 6 is reserved. It is always read as
0 and the write value should always be 0.
0: A/D converter start request generation by TCNT_4
underflow (trough) disabled
1: A/D converter start request generation by TCNT_4
underflow (trough) enabled
5 TCIEU 0 R/W Underflow Interrupt Enable
Enables or disables interrupt requests (TCIU) by the
TCFU flag when the TCFU flag in TSR is set to 1 in
channels 1 and 2.
In channels 0, 3, and 4, bit 5 is reserved. It is always
read as 0 and the write value should always be 0.
0: Interrupt requests (TCIU) by TCFU disabled
1: Interrupt requests (TCIU) by TCFU enabled