Filter
Top Products
Configuration and management 96
Model 1001MC Operations Guide 6 • Model 1095RC management
Figure 45. Web page navigation to Model 1095 Configuration Slot page
Making configuration changes to your 1095RC NetLink modem
Do use the following to make configuration changes to your NetLink modem.
Note You must be logged in as superuser to perform the following procedure.
1. With the Model 1095 Configuration Slot page displayed, change the Input Mode (see figure 44) to super-
VisoryMode. The Modify Configuration hyperlink will appear.
2. Click on the Modify Configuration hyperlink to display the Model 1095RC Next Configuration page.
3. Make your configuration changes or select the Set Default Configuration button.
4. Select the Submit Query button to place the changes into the 1001MC’s temporary memory. If you decide
that you do not want your changes implemented, you can select the
Clear Changes button.
5. Select the Back hyperlink to return to the Model 1095 Configuration Slot page.
6. Change the Input Mode back to onLine and select the Submit Query button. When the unit returns to the
online state, the 1095RC will begin implementing the configuration changes.
Note The variables that you changed are now highlighted in yellow. After the
1095RC processes the new information, the highlighting will be
removed.
For more information about items on the Model 1095 Configuration Slot page, see “After submitting the
remote circuit ID information, you must click on the Record Current Configuration button located on the
HOME page to store the configuration changes into memory (see “HOME” on page 228 for more informa-
tion).” on page 104.