Filter
Top Products
Model 3088RC Configuration Slot X page MIB variables description 205
Model 1001MC Operations Guide 9 • Model 3088RC management
DTE Rate (dteRate3088RC)
This variable displays the DTE rate for the link. This is the Nx64 kbps data rate selected by the number of acti-
vated channels.
Clock Mode (clockMode3088RC)
This variable defines the clock mode for the NetLink-E1 modems. The following status variables can be dis-
played:
• network-CLK(0)
• internal-CLK(1)
• external-CLK(2)
TX Clock Invert (tcClockInvert3088RC)
• enable(0)
• disable(1)
DSL Link Enable (dslLinkEnable3088RC)
• enable(0)
• disable(1)
Line Probe (lineProbe3088RC)
Enables or disables the Line Probe feature to negotiate the optimal rate for current line conditions
• enable(0)
• disable(1)
Annex Type (annexType3088RC)
Sets the DSL annex type
• annexA(0)
• annexB(1)
SW Test Mode (testModeSet3088RC)
This displays any test mode invoked through the NMS. See next configuration for information about invoking
test modes through the NMS. This option will be highlighted in blue if the unit is in test mode.
• none(0)-No test mode in process
• lal(1)-Local loopback test
• rdl(2)-Remote loopback
Front Panel Switches (frontPannelSwitches3088RC)
• This variable allows or disallows the front panel switches to cause the unit to go into test mode.
• enable(0)
• disable(1)