Filter
Top Products
Modem Information page MIB variables description 78
Model 1001MC Operations Guide 5 • Model 1094ARC management
Starting from the HOME page, to access the Download page for the 1094ARC, click on the Download link.
Figure 37 shows the web page navigation required to get to this area of the system.
Figure 37. Web page navigation to Download page
For more information about items on the Slot Configuration page, see “Using the Download page to upgrade
1094ARC software” on page 87.
Modem Information page MIB variables description
This section describes the MIB variables that are available on the Modem Information page.
Slots Available (totalConfigSlots)
Displays the number of configurable slots available in the rack.
Modems Installed (rackXCardsInstalled)
Displays the number of modem cards installed in the rack that the system has found.
Number of Power Supplies (rackXPowerSupplies)
This is where you specify the number of power supplies installed in the rack (this value determines the addressing
range for the rack). In the case of a redundant power supply system, you should set this variable to 2, this will
inform the Model 1001MC that there should be 2 power supplies in the system.
Rack Protection Mode
If you want to protect all Model 1095RC rack cards installed in the current rack from being globally config-
ured, select protected(1) from the pop-up menu, then click the
Submit button. For more information about the
system configuration feature, refer to section “System Config” on page 259.