Filter
Top Products
Configuration and management 53
Model 1001MC Operations Guide 4 • Model 1092ARC management
Figure 23. Web page navigation to Model 1092 Configuration Slot page
Making configuration changes to your 1092ARC NetLink modem
Do use the following to make configuration changes to your NetLink modem.
Note You must be logged in as superuser to perform the following procedure.
1. With the Model 1092 Configuration Slot page displayed, change the Input Mode (see figure 22) to super-
VisoryMode. The Modify Configuration hyperlink will appear.
2. Click on the Modify Configuration hyperlink to display the Model 1092A Next Configuration page.
3. Make your configuration changes or select the Set Default Configuration button.
4. Select the Submit Query button to place the changes into the 1001MC’s temporary memory. If you decide
that you do not want your changes implemented, you can select the
Clear Changes button.
5. Select the Back hyperlink to return to the Model 1092 Configuration Slot page.
6. Change the Input Mode back to onLine and select the Submit Query button. When the unit returns to the
online state, the 1092A will begin implementing the configuration changes.
Note The variables that you changed are now highlighted in yellow. After the
1092A processes the new information, the highlighting will be removed.
For more information about items on the Model 1092 Configuration Slot page, see “Model 1092 Configura-
tion Slot page MIB variables description” on page 61.