Filter
Top Products
Creating and modifying global configuration templates 157
Model 1001MC Operations Guide 7 • Model 2701RC management
3. Click the Apply Protection button.
The rack is now protected.
Protecting a selected Model 2701RC rack card from global configuration
Do the following to protect a single Model 2701RC rack card:
1. Starting from the HOME page, click on the following links: Configure Cards > View Rack 1 (choose the
rack you want to protect, in the example shown in figure 75, rack 1 was selected). Figure 75 shows the web
page navigation required to get to this area of the system.
Figure 75. NTU Information Rack 1 page
2. Locate the card address (see figure 55 on page 119) of the Model 2701RC you want to protect.
3. Set the Protected pop-up menu (see figure 55 on page 119) to protected(1).
Note Setting the Protected option to normal(0) will enable the Model
2701RC to receive new configurations through the global configura-
tion command.
4. Click the Submit button.
The rack card is now protected.