Filter
Top Products
Saving HTTP/HTML object changes 42
Model 1001MC Operations Guide 3 • Getting started
HTTP/HTML and SNMP object format
In this document, we shall describe the variables found on each of the internal HTTP/HTML pages. This
description will include brief definitions of the Patton Enterprise MIB or SNMP MIB II object identifiers
wherever applicable. The format of the variables will resemble figure 17.
Figure 17. HTTP/HTML and SNMP object format
Saving HTTP/HTML object changes
Sometimes you will need to save changes that you have made in the HTTP/HTML pages. Do the following to
make changes to read/write variables:
1. Select the appropriate Modify screen.
2. Make changes to the desired parameter.
3. Click on the Submit button.
4. Return to the HOME screen.
5. Click on the Record Current Configuration button.
Note Make sure you follow steps 1 through 5 when modifying the
HTTP/HTML pages. Otherwise, your changes will be lost when the
1001MC is power-cycled.
Help screens
The Model 1001MC web pages have built-in help screens that enable you to get information about the vari-
ables that are being described. Each web page contains several headings that describe the section that is being
defined. Some of the headings are hyperlinks to the help screen for that page. The new window will automati-
cally scroll to the help area that was requested. You may also scroll through this page to view help information
about other sections of the page. In some cases, the headings for the tables will be shown as hyperlinks, these
hyperlinks, work the same as was previously discussed, showing the help screen for that column of the table.
HTTP/HTML web page navigation
This section describes how to navigate the internal HTTP/HTML web pages on the Model 1001MC. The
diagram below shows how all of the web pages are linked together. Following figure 18, there is a brief descrip-
tion of each page. For more detailed information about each web page, refer to chapter 10, “HTTP/HTML
web page reference” on page 220.