Filter
Top Products
Modem Information page MIB variables description 177
Model 1001MC Operations Guide 8 • Model 2707RC management
Figure 90. Web page navigation to Slot Configuration page
For more information about items on the Slot Configuration page, see “Slot Configuration page MIB variables
description” on page 185.
Modem Information page MIB variables description
This section describes the MIB variables that are available on the Modem Information page.
Slots Available (totalConfigSlots)
Displays the number of configurable slots available in the rack.
Modems Installed (rackXCardsInstalled)
Displays the number of modem cards installed in the rack that the system has found.
Number of Power Supplies (rackXPowerSupplies)
This is where you specify the number of power supplies installed in the rack (this value determines the addressing
range for the rack). In the case of a redundant power supply system, you should set this variable to 2, this will
inform the Model 1001MC that there should be 2 power supplies in the system.
Rack Protection Mode
If you want to protect all Model 2707RC rack cards installed in the current rack from being globally config-
ured, select protected(1) from the pop-up menu, then click the
Submit button. For more information about the
system configuration feature, refer to section “System Config” on page 259.
Note Setting the Rack Protection Mode to normal(0) will enable the rack to
receive new configurations through the global configuration command.