Filter
Top Products
Configuration and management 173
Model 1001MC Operations Guide 8 • Model 2707RC management
Figure 86. Web page navigation to Model 2707RC Configuration Slot page
Making configuration changes to your 2707RC NetLink NTU
Do use the following to make configuration changes to your NetLink NTU.
Note You must be logged in as superuser to perform the following procedure.
1. With the Model 2707RC Configuration Slot page displayed, change the Input Mode (see figure 85) to
superVisoryMode. The Modify Configuration hyperlink will appear.
2. Click on the Modify Configuration hyperlink to display the Model 2707RC Configuration page.
3. Make your configuration changes or select the Set Default Configuration button.
4. Select the Submit Query button to place the changes into the 1001MC’s temporary memory. If you decide
that you do not want your changes implemented, you can select the
Clear Changes button.
5. Select the Back hyperlink to return to the Model 2707RC Configuration Slot page.
6. Change the Input Mode back to onLine and select the Submit Query button. When the unit returns to the
online state, the 2707RC will begin implementing the configuration changes.
Note The variables that you changed are now highlighted in yellow. After the
2707RC processes the new information, the highlighting will be
removed.
For more information about items on the Model 2707RC Configuration Slot page, see “Model 2707RC Con-
figuration Slot page MIB variables description” on page 181.