Filter
Top Products
Slot Configuration page MIB variables description 153
Model 1001MC Operations Guide 7 • Model 2701RC management
RDL Type (rdlType)
This displays the selected remote loopback type that will be used when initiating a remote loopback. Available
options are:
• csu(1)
• v54(2)
Config Type (configType)
The following options are available:
• switch-config(0)—The 2701RC is using the DIP switch control for its configuration
• software-config(1)—The 2701RC is using the software control for its configuration
Test Mode from DTE (testModeDTE)
When enabled, the 2701RC will respond to LL and RDL signals coming from the DTE.
Note Only applies to 2701RC rack cards with an X.21 or V.35 interface.
Slot Configuration page MIB variables description
This section describes the MIB variables that are available on the Slot Configuration page. From the Modem Infor-
mation page, the address column creates a list of hyperlinks to the Slot Configuration page associated with the spec-
ified address. The
Slot Configuration page can be used to set slot-specific information related to the system and
how the system treats the slot in the case of errors and warning. Starting from the
HOME page, click on the follow-
ing links: Home (menu) > Configure Cards (menu) > View Rack [rack number] > X (in the Card Address column).
Card Address (nmsSlotID)
Displays the address of the card.
Local Model Code (localModelCode)
Displays the model code of the NetLink modem installed at the specified address.
View Rack X hyperlink
Click on the View Rack X link to display the Modem Information Rack X window (see section “Modem Infor-
mation Rack X” on page 239 for more information).
Card Identification Information
Local User Id (localUserID)
User supplied string that defines the NetLink NTU installed in the rack. The string is stored in non-volatile
flash within the NetLink NTU and is useful for hardware identification. If the address of the modem is
changed, the User ID will move to the new slot. The string can be up to 10 bytes long and can be changed or
reset within this page.