Filter
Top Products
Creating and modifying global configuration templates 125
Model 1001MC Operations Guide 6 • Model 1095RC management
– normal(3)
9. Configure the Remote Framing Mode pop-up menu using the following choices:
– slotted(0)
– normal(3)
10. When you have finished setting the configuration, click on the Submit button to save the changes.
Note If you receive an invalid configuration error after creating a configura-
tion, it is resulting from an illegal combination of variables. Refer to sec-
tion “Illegal configuration messages” on page 122 for more
information.
Refer to section “Applying a template” on page 125 to activate the template.
Figure 62. Global Configuration Menu page
Deleting a template
Do the following to delete a template:
Note When a template configuration is deleted, it cannot be recovered.
1. Select a template from the Delete Configuration pop-up menu (see figure 62).
2. Click the Delete Configuration button.
Applying a template
This section describes how to apply a global configuration to all Model 1095RC rack cards other than those
that meet one of the following exceptions:
• Model 1095RC rack cards installed in Model 1001 racks that have had the Rack Protection Mode option
set to protected(1) will not be configured if a global template is applied (see section “Protecting a Model
1001 rack from global configuration” on page 114 for more information.