Filter
Top Products
Installing NetLink modem cards 21
Model 1001MC Operations Guide 2 • Hardware installation
from the power supplies) and increment the numbers by one as you go from left to right. Setting the addresses
in this manner will make configuration easier as you start using the web page management. An example of this
is shown below.
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - NMS - PS2 - PS1
Table 3 shows the bit setting to configure the address. Table 4 shows examples of address settings.
Table 3. Bit setting to configure the address
Upper (Lower) Nibble
(S2-4)
S2-7
(S2-3)
S2-6
(S2-2)
S2-5
(S2-1)
0 ON ON ON ON
1 ON ON ON OFF
2 ON ON OFF ON
3 ON ON OFF OFF
4 ON OFF ON ON
5 ON OFF ON OFF
6 ON OFF OFF ON
7 ON OFF OFF ON
8 OFF ON ON ON
9 OFF ON ON OFF
A OFF ON OFF ON
B OFF ON OFF OFF
C OFF OFF ON ON
D OFF OFF ON OFF
E OFF OFF OFF ON
F OFF OFF OFF OFF
Table 4. Examples of address settings
Address in Hex (Dec.) S2-7 S2-6 S2-5 S2-4 S2-3 S2-2 S2-1
0x01 (1) ON ON ON ON ON ON OFF
0x02 (2) ON ON ON ON ON OFF ON
0x10 (16) ON ON OFF ON ON ON ON
0x35 (53) ON OFF OFF ON OFF ON OFF