Filter
Top Products
Modem Information page MIB variables description 57
Model 1001MC Operations Guide 4 • Model 1092ARC management
Figure 27. Web page navigation to Slot Configuration page
For more information about items on the Slot Configuration page, see “Slot Configuration page MIB variables
description” on page 65.
Modem Information page MIB variables description
This section describes the MIB variables that are available on the Modem Information page.
Slots Available (totalConfigSlots)
Displays the number of configurable slots available in the rack.
Modems Installed (rackXCardsInstalled)
Displays the number of modem cards installed in the rack that the system has found.
Number of Power Supplies (rackXPowerSupplies)
This is where you specify the number of power supplies installed in the rack (this value determines the addressing
range for the rack). In the case of a redundant power supply system, you should set this variable to 2, this will
inform the Model 1001MC that there should be 2 power supplies in the system.
Rack Protection Mode
Note For Model 1095RC only.
If you want to protect all Model 1095RC rack cards installed in the current rack from being globally config-
ured, select protected(1) from the pop-up menu, then click the
Submit button. For more information about the
system configuration feature, refer to section “System Config” on page 259.