Filter
Top Products
Introduction 69
Model 1001MC Operations Guide 5 • Model 1094ARC management
Introduction
This chapter describes managing a Model 1094ARC NetLink HDSL modem using the Model 1001MC
NetLink-NMS internal HTTP/HTML web engine and a standard web browser. This chapter is meant to be
used in addition to the manual that came with your unit.
NetLink-NMS description
Specifically designed for use in the Patton NetLink system, when the NetLink HDSL is coupled with the Model
1001MC NetLink-NMS and the Patton Model 1001 rack system, the modem is fully SNMP manageable.
SNMP management can be performed on both the local and remote units using a standard SNMP network man-
agement station (NMS) or by using a standard web browser and the Model 1001MC's built-in web server. You
can view and change configuration variables, view statistical variables, and view error and warning indications.
Configuration and management
This section describes the configuration and management of your NetLink HDSL modems using a Model
1001MC NetLink-NMS with built in HTTP/HTML web server. If you plan to manage your units using a
standard network management station you can download the Patton Enterprise MIBs either through the
SNMP web page on the Model 1001MC or obtain them from the Patton web site at www.patton.com.
The following pages are used to configure and manage the Model 1094ARC:
• Modem Information page: This page displays a list of the cards that are installed in your system and a quick
view of any errors or warnings associated with your modems (see section “Displaying the Modem Informa-
tion page” on page 70)
• Model 1094 Configuration Slot page: This page (along with the Model 1094 Configuration—Next Config-
uration page) enables you to make configuration changes to the Model 1094A and the remote CPE box (see
section “Displaying the Model 1094 Configuration Slot page” on page 72)
• Model 1094 Configuration—Next Configuration page: This page (along with the Model 1094 Configura-
tion Slot page) enables you to update configuration of modems installed in the system (see “Displaying the
Model 1094 Configuration—Next Configuration page” on page 74)
• Slot Configuration page: This page can be used to set slot-specific information related to the system and how
the system treats the slot in the case of errors or warnings (see section “Displaying the Model 1094 Configu-
ration Slot page” on page 72)
• Download page: This page is where you can download the latest version of 1001MC and 1094ARC soft-
ware (see section “Displaying the Download page” on page 77)
Note For information about other Model 1001MC pages, refer to
chapter 10, “HTTP/HTML web page reference” on page 220.