Filter
Top Products
System Config 274
Model 1001MC Operations Guide 10 • HTTP/HTML web page reference
Configure all Model 1095RC rack cards in one Model 1001 rack
Do the following to apply global configuration to all Model 1095RC rack cards installed in one Model 1001 rack:
1. Starting from the HOME page, click on the Configure Cards link to display the System Level Information page
see figure 137. Figure 136 on page 273 shows the web page navigation required to get to this area of the sys-
tem.
Figure 137. System Level Information page
2. Locate the rack section of the System Level Information page that you will configure (in figure 137, Rack 1
Top Level is being modified).
3. Use the Apply Rack Configuration pop-up menu (see figure 137) to select the template you want to apply.
4. Click the Apply Configuration button.
The template has been applied.