Filter
Top Products
Model 2701 Configuration page MIB variables description 151
Model 1001MC Operations Guide 7 • Model 2701RC management
CRC4 Framing (crc)
This variable is used to enable or disable CRC-4 framing. The following options are available:
• disable(0)
• enable(1)
Note This setting should be the same as the G.703/G.704 network.
CAS Multiframing (casMF)
This variable is used to enable or disable CAS multiframing. The following options are available:
• disable(0)
• enable(1)
Note This setting should be the same as the G.703/G.704 network.
Line Build Out (lineBuildOut)
This is used to select the line build out. The following options are available:
• lbo-75ohm(0)—75 ohm
• lbo-120ohm(1)—120 ohm
Tx Clock Timing (txClock)
The following options are available:
• external(0)—serial transmit data coming from the DTE is clocked in using the DTE provided external clock
• internal(1)—serial transmit data coming from the DTE is clocked in using the DCE provided transmit clock
H/W Test Mode (testModeSetInd)
This read-only variable displays any test mode invoked from the toggle switches and DTE test mode lines. If
the unit is in a test mode, this option will be highlighted in blue.
• off(1)
• pat(2)
• pate(3)
• lal(4)
• lalWithpat(5)
• lalWithpate(6)
• rdl-v54(7)
• rdl-v54Withpat(8)
• rdl-v54Withpate(9)
• rdl-csu(10)
• rdl-csuWithpat(11)