Filter
Top Products
System Level Information 235
Model 1001MC Operations Guide 10 • HTTP/HTML web page reference
Import Configuration
To import a configuration file into the access server, type the complete path and filename for the configuration
file you wish to load or click on the
Browse… button to select the desired file, then click on the Submit Query
button (see figure 114 on page 233).
Upon successfully importing the file, the access server will display Configuration Load Complete, indicating that
the new operating parameters have been loaded into flash memory.
Click on HOME under the Configuration Menu, then click on the Hard Reset button under Immediate Actions.
Note Do not select Record Current Configuration after importing configuration
parameters.
System Level Information
Clicking the Configure Cards hyperlink on the HOME page displays the System Level Information page.
Figure 113 displays a portion of the information page for the NetLink system being managed. The System Level
Information page contains statistical information about the entire system and explains how that information is
broken down among the racks. Each rack can be enabled or disabled from this level. When a rack is disabled, the
1001MC stops polling the addresses contained in the specified rack. The 1001MC’s ability to stop polling is use-
ful when installing less than eight racks or when taking cards offline in order to perform servicing. The modems
installed in the system will continue to operate at the last setting provided. This page also allows you to clear
alarms on a per-rack or system basis. Each rack view also contains a
View Rack hyperlink to the Modem Informa-
tion page (see section “Modem Information Rack X” on page 239 for more information). The following sections
describe the variables contained within the System Level Information page.
System Overview
This section of the System Level Information window (see figure 113 on page 232) does the following:
• Displays status information compiled from all Model 1001 racks in the system
• Provides several test patterns for use when running diagnostics in system test mode
• Enables you to apply global system configurations to Model 1095RC, 2701RC, and 2707RC rack cards
installed in the system
Apply System Configuration
If you are applying a global configuration to all Model 1095RC, 2701RC, and 2707RC rack cards in the sys-
tem, select the desired template from the pop-up menu, then click the
Apply Configuration button. For more
information about the system configuration feature (including how to protect rack cards and racks from being
modified), refer to section “System Config” on page 259.