Filter
Top Products
2. Insert the exposed end into the clamp beneath the termination screw.
3. Tighten the screw.
3.5.14 Analog input wiring
All 700XAs have at least two analog inputs. An additional four analog inputs are available
with a ROC800 AI-16 card that can be installed into one of the optional slots in the card
cage.
Analog inputs on the blackplane
There are two analog input connections on the backplane at TB10.
TB10 on the black planeFigure 3-24:
Analog InputsTable 3-3:
TB10 Function
Pin 1 +AI_1
Pin 2 -AI_1
Pin 3 +AI_2
Pin 4 -AI_2
Factory settings for analog input switches
Figure 3-25 shows the factory settings for the analog input switches that are located on the
Base I/O board. These analog inputs are set to accept a current (4-20 mA) source.
Installation and setup
3
Installation and setup
63