Filter
Top Products
CPU board link lightsFigure 3-12:
4. Do the following to ensure that your network adapter is enabled:
a. Go to Start → Control Panel → Network Connections.
b. Check the status of the Local Area Connection icon. If the status appears as
Disabled, right-click on the icon and select Enable from the context menu.
5. Do the following to try to repair the network connection:
a. Go to Start → Control Panel → Network Connections.
b. Right-click on the Local Area Connection icon and select Repair from the context
menu.
3.5.10 Connecting directly to a PC using the GC’s serial port
The GC’s serial port at J23 on the back plane allows a PC with the same type of port to
connect directly to the GC. This is a useful feature for a GC that is located in an area
without internet access; all that is needed is a PC running Windows XP Service Pack 3,
Windows Vista, or Windows 7—typically a notebook computer—and a straight through
serial cable.
Installation and setup
3
Installation and setup
51