Filter
Top Products
Board Jumper Set?
LOI J1 Yes
For more details, consult the following drawings:
Preamplifier boardFigure 4-38:
JP1 on the preamplifier board should not be set. The preamplifier board is located in slot 1
of the card cage.
Heater/solenoid driver boardFigure 4-39:
JP1 on the heater/solenoid driver board should not be set. The heater/solenoid driver
board is located in slot 2 of the card cage. If there is an additional heater/solenoid driver
board, it will be located in slot 4, and its JP1 jumper also should not be set.
Operation and maintenance
4
Operation and maintenance
123