Filter
Top Products
3.2.1 Wall mount
The simplest mounting arrangement is the wall mount. If ‘Wall Mount’ is specified on the
sales order, the unit will be shipped with a wall mount installation kit. Four locations on the
mounting ears are available for support.
1. The unit is most easily mounted if a pair of 7/16-inch dia. (10 mm dia.) bolts with
washers are pre-installed on the wall from which to hang the unit before installing
the final pair of bolts.
The first pair of bolts should be approximately 41.625 inches (1055 mm) off the
ground, and 13.625 inches (346 mm) apart. Each bolt should have 5/8-inches (16
mm) of bare length projecting. A second pair of holes 3.56 inches (90.5 mm) above
the first will be required.
CAUTION!
Until all bolts are tight, the unit should be supported to prevent unforeseen accidents.
Wall mountFigure 3-1:
Installation and setup
30