Filter
Top Products
Components of a TCD blockFigure 4-7:
4. To replace the TCD, reverse the steps taken to remove it.
Note
The block screws should be tightened with a torque wrench to 20 inch-ounce.
4.4.8 Removing the FID
The FID has no replaceable parts. Damage such as a broken RTD or igniter coil will require
that the unit be removed and replaced.
WARNING!
Disconnect all electrical power to the unit and ensure the area is free of explosive gases. Failure
to follow this warning may result in injury or death to personnel or cause damage to the
equipment.
Operation and maintenance
4
Operation and maintenance
95