Filter
Top Products
The mechanical pressure regulators and gauges are used to set and monitor the pressure
of the carrier gas flow through the GC's columns, as well as the pressure of the FID air and
fuel (H
2
).
The regulators and gauges are located beneath the GC.
2.2 Equipment specifications
2.2.1 Utilities
Use the following table to determine the utility specifications.
Type Specification
Unit dimen-
sions
• Basic unit envelope
W - 15.2” (387 mm)
H - 41.5” (1054 mm)
D - 19.2” (488 mm)
• Wall mount
W - 18.2” (463 mm)
H - 41.5” (1054 mm)
D - 19.2” (488 mm)
• Pole mount
W - 18.2” (463 mm)
H - 41.5” (1054 mm)
D - 25.0” (635 mm)
• Floor mount
W - 18.2” (463 mm)
H - 58.0” (1470 mm)
D - 19.2” (488 mm)
Note
Allow 14” (360 mm additional) clearance for removal of dome.
Unit weight • Wall mount - 110 lbs (59 kg)
• Pole mount - 135 lbs (61 kg)
• Floor mount - 180 lbs (82 kg)
Tubing • 316 stainless steel
• 316 stainless steel and Kapton
®
in contact with sample
• Sulfinert
®
steel (optional)
Equipment description and specifications
2
Equipment description and specifications
21