Filter
Top Products
1-18
Catalyst 2960 and 2960-S Switch Software Configuration Guide
OL-8603-09
Chapter 1 Overview
Network Configuration Examples
• MVR is disabled. For more information, see Chapter 22, “Configuring IGMP Snooping and MVR.”
Note To use MVR, the switch must be running the LAN Base image.
• Port-based traffic
–
Broadcast, multicast, and unicast storm control is disabled. For more information, see
Chapter 23, “Configuring Port-Based Traffic Control.”
–
No protected ports are defined. For more information, see Chapter 23, “Configuring Port-Based
Traffic Control.”
–
Unicast and multicast traffic flooding is not blocked. For more information, see Chapter 23,
“Configuring Port-Based Traffic Control.”
–
No secure ports are configured. For more information, see Chapter 23, “Configuring Port-Based
Traffic Control.”
• CDP is enabled. For more information, see Chapter 25, “Configuring CDP.”
• UDLD is disabled. For more information, see Chapter 24, “Configuring UDLD.”
• SPAN and RSPAN are disabled. For more information, see Chapter 27, “Configuring SPAN and
RSPAN.”
Note To use RSPAN, the switch must be running the LAN Base image.
• RMON is disabled. For more information, see Chapter 28, “Configuring RMON.”
• Syslog messages are enabled and appear on the console. For more information, see Chapter 29,
“Configuring System Message Logging.”
• SNMP is enabled (Version 1). For more information, see Chapter 30, “Configuring SNMP.”
• No ACLs are configured. For more information, see Chapter 31, “Configuring Network Security
with ACLs.”
• QoS is disabled. For more information, see Chapter 33, “Configuring QoS.”
• No EtherChannels are configured. For more information, see Chapter 37, “Configuring
EtherChannels and Link-State Tracking.”
Network Configuration Examples
This section provides network configuration concepts and includes examples of using the switch to
create dedicated network segments and interconnecting the segments through Fast Ethernet and Gigabit
Ethernet connections.
• “Design Concepts for Using the Switch” section on page 1-19
• “Small to Medium-Sized Network Using Catalyst 2960 and 2960-S Switches” section on page 1-22
• “Long-Distance, High-Bandwidth Transport Configuration” section on page 1-23