Filter
Top Products
Setup Menu T400 Ozone Analyzer Operator’s Manual
96
DEFAULT SETTINGS
The default setting for these the reporting ranges of the analog output channels A1 and
A2 are:
SNGL mode
0 to 400.0 ppb
0 to 5 VDC
Reporting range span may be viewed via the front panel by viewing the RANGE test
function. If the DUAL or AUTO modes are selected, the RANGE test function will be
replaced by two separate functions, RANGE1 & RANGE2. Reporting range status is
also available as output via the external digital I/O status bits (see Section 3.3.1.5).
Note
Upper span limit setting for the individual range modes are shared.
Resetting the span limit in one mode also resets the span limit for the
corresponding range in the other modes as follows:
SNGL
DUAL AUTO
Range Range1 (Low) Low Range
Range2 (Hi) High Range
06870C DCN6332