Filter
Top Products
v
WARRANTY
Teledyne Advanced Pollution Instrumentation, a business unit of Teledyne Instruments,
Inc., herein referred to as TAPI, warrants its products as follows:
WARRANTY POLICY (02024D)
Prior to shipment, TAPI equipment is thoroughly inspected and tested. Should equipment failure
occur, TAPI assures its customers that prompt service and support will be available.
COVERAGE
After the warranty period and throughout the equipment lifetime, TAPI stands ready to provide
on-site or in-plant service at reasonable rates similar to those of other manufacturers in the
industry. All maintenance and the first level of field troubleshooting is to be performed by the
customer.
NON-API MANUFACTURED EQUIPMENT
Equipment provided but not manufactured by TAPI is warranted and will be repaired to the
extent and according to the current terms and conditions of the respective equipment
manufacturers warranty.
GENERAL
During the warranty period, TAPI warrants each Product manufactured by TAPI to be free from
defects in material and workmanship under normal use and service. Expendable parts are
excluded.
If a Product fails to conform to its specifications within the warranty period, TAPI shall correct
such defect by, at TAPI's discretion, repairing or replacing such defective Product or refunding
the purchase price of such Product.
The warranties set forth in this section shall be of no force or effect with respect to any Product:
(i) that has been altered or subjected to misuse, negligence or accident, or (ii) that has been used
in any manner other than in accordance with the instruction provided by TAPI, or (iii) not
properly maintained.
THE WARRANTIES SET FORTH IN THIS SECTION AND THE REMEDIES THEREFORE ARE
EXCLUSIVE AND IN LIEU OF ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR PARTICULAR PURPOSE OR OTHER WARRANTY OF QUALITY, WHETHER
EXPRESSED OR IMPLIED. THE REMEDIES SET FORTH IN THIS SECTION ARE THE
EXCLUSIVE REMEDIES FOR BREACH OF ANY WARRANTY CONTAINED HEREIN. TAPI
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF OR RELATED TO THIS AGREEMENT OF TAPI'S PERFORMANCE HEREUNDER,
WHETHER FOR BREACH OF WARRANTY OR OTHERWISE.
TERMS AND CONDITIONS
All units or components returned to TAPI should be properly packed for handling and returned
freight prepaid to the nearest designated Service Center. After the repair, the equipment will be
returned, freight prepaid.
ATTENTION
AVOID WARRANTY INVALIDATION
Failure to comply with proper anti-Electro-Static Discharge (ESD)
handling and packing instructions and Return Merchandise Authorization
(RMA) procedures when returning parts for repair or calibration may void
your warranty. For anti-ESD handling and packing instructions please
refer to “Packing Components for Return to Teledyne API’s Customer
Service” in the Primer on Electro-Static Discharge section of this manual,
and for RMA procedures please refer to our Website at http://www.teledyne-
api.com under Customer Support > Return Authorization.
06870C DCN6332