Filter
Top Products
Teledyne API - T100 UV Fluorescence SO2 Analyzer Overview of Operating Modes
91
Table 4-5: Secondary Setup Mode Features and Functions
MODE OR FEATURE
CONTROL
BUTTON
DESCRIPTION
MANUAL
SECTION
External Communication
Channel Configuration
COMM
Used to set up and operate the analyzer’s various external I/O
channels including RS-232; RS-485, modem communication
and/or Ethernet access.
8
System Status Variables
VARS
Used to view various variables related to the instruments
current operational status
Changes made to any variable are not acknowledged and
recorded in the instrument’s memory until the ENTR button is
pressed.
Pressing the EXIT button ignores the new setting.
If the EXIT button is pressed before the ENTR button, the
analyzer will beep alerting the user that the newly entered
value has been lost.
5.8
System Diagnostic Features
and
Analog Output Configuration
DIAG
Used to access a variety of functions that are used to configure,
test or diagnose problems with a variety of the analyzer’s basic
systems.
Most notably, the menus used to configure the output signals
generated by theinstruments’ analog outputs are located here.
5.9 & 5.10
IMPORTANT
IMPACT ON READINGS OR DATA
Any changes made to a variable (VARS) during the SETUP procedures are
not acknowledged by the instrument until the ENTR button is pressed. If
the EXIT button is pressed before the ENTR button, the analyzer will beep,
alerting the user that the newly entered value has not been accepted.
06870C DCN6332