Filter
Top Products
APPENDIX A-2: Setup Variables, Revision 1.0.0/E.3 Teledyne API - Models T400 and 400E (04402F DCN6340)
A-16
SETUP VARIABLE
NUMERIC
UNITS
DEFAULT
VALUE
VALUE RANGE DESCRIPTION
FACTORY_OPT
— 0 0–65535
Factory option flags. Add values to combine
options.
1 = enable dilution factor
2 = O
3
generator installed
2
4 = O
3
generator and reference detector
installed
2
8 = zero and span valves installed
16 = display units in concentration field
32 = enable software-controlled
maintenance mode
64 = enable heated O
3
scrubber
128 = enable switch-controlled
maintenance mode
256 = internal zero valve only installed
512 = enable concentration alarms
5
1024 = alternate status output
mapping
2048 = enable Internet option
3
8192 = enable non-zero offset
calibration
16384 = enable external analog inputs
6
0
Enclose value in double quotes (") when setting from the RS-232 interface.
1
Hessen protocol.
2
Must power-cycle instrument for these options to fully take effect.
3
Internet option (applies to E-series).
4
Spike suppression option.
5
Concentration alarm option.
6
T Series external analog input option.
06870C DCN6332