Filter
Top Products
1. Parameter Screens
1
1. Parameter Screens
The parameter input setting units are as follow.
Linear axis "#1017 rot"=0
Input unit
"#1003 iunit"
Machine constant:mm
"#1040 M_inch"=0
Machine constant:inch
"#1040 M_inch"=1
Rotary axis
"#1017 rot"=1
B 0.001 mm 0.0001 inch 0.001°
C 0.0001 mm 0.00001 inch 0.0001°
(1) User parameters
The following menus can be selected when the key
TOOL
PARAM
is pressed.
Menu Details Reference Section
WORK
The WORK OFFSET screen will open. 2.1 Workpiece Coordinate
Offset
2.2 Process Parameters
2.3 Control Parameters
2.4 Axis Parameters
PROCESS
The PROCESS PARAM screen will open.
2.5 Barrier Data
3.1 Base Parameters
I/O PARAM
The I/O PARAM screen will open.
3.2 I/O Device Parameters
SETUP
The screen to set the setup parameters will
open.
4. Setup Parameters