Mitsubishi Electronics C64 Crib Toy User Manual


 
8. Spindle Parameters
8.3 MDS-B-SP/SPH, MDS-C1-SP/SPH
222
No. Items Details
Setting
range
Standard
setting
3341
(PR)
SP141 VGCI2 Second
speed loop
gain integral
item for
cutting on
C-axis
Set the speed loop integral gain when the
second gain is selected for C-axis cutting.
0 to 5000
(0.1 1/s)
60
3342
(PR)
SP142 VGCD2
Second
speed loop
gain delay
advance item
for cutting on
C-axis
Set the speed loop delay advance gain
when the second gain is selected for C-axis
cutting.
When this parameter is set to "0", PI control
is applied.
0 to 5000
(0.1 1/s)
15
3343
(PR)
SP143 VGCP3 Third speed
loop gain
proportional
item for
cutting on
C-axis
Set the speed loop proportional gain when
the third gain is selected for C-axis cutting.
0 to 5000
(1/s)
63
3344
(PR)
SP144 VGCI3 Third speed
loop gain
integral item
for cutting on
C-axis
Set the speed loop integral gain when the
third gain is selected for C-axis cutting.
0 to 5000
(0.1 1/s)
60
3345
(PR)
SP145 VGCD3 Third speed
loop gain
delay
advance item
for cutting on
C-axis
Set the speed loop delay advance gain
when the third gain is selected for C-axis
cutting.
When this parameter is set to "0", PI control
is applied.
0 to 5000
(0.1 1/s)
15
3346
(PR)
SP146 VGCP4 Speed loop
gain propor-
tional item for
stop of
cutting on
C-axis
Set the speed loop proportional gain when
C-axis cutting is stopped.
0 to 5000
(1/s)
63
3347
(PR)
SP147 VGCI4 Speed loop
gain integral
item for stop
of cutting on
C-axis
Set the speed loop integral gain when
C-axis cutting is stopped.
0 to 5000
(0.1 1/s)
60
3348
(PR)
SP148 VGCD4 Speed loop
gain delay
advance item
for stop of
cutting on
C-axis
Set the speed loop delay advance gain
when C-axis cutting is stopped.
When this parameter is set to "0", PI control
is applied.
0 to 5000
(0.1 1/s)
15