Mitsubishi Electronics C64 Crib Toy User Manual


 
5. Base Specifications Parameters
36
# Items Details
Setting range (unit)
1169 system
name
Part system
name
Set the name of each part system.
This must be set when using the multiple part system.
This name is displayed on the screen only when the
part systems must be identified.
Use a max. of four alphabetic characters or numerals.
A max. of four
alphabetic
characters or
numerals.
1170 M2nam
e
Second
miscellane-
ous code
Set this address code when using the 2nd miscellane-
ous command. Set an address with A‚ B and C that is
not used with "#1013 axname" or "#1014 incax".
A, B, C
1171 taprov Tap retract
override
Set the tap retract override value for the synchronous
tap.
1 to 100 (%)
1172 tapovr Tap retract
override
Set the override value when leaving the tap end point in
the synchronous tap cycle.
The setting range is 1 to 999‚ and the unit is %.
When a value less than 100 is set‚ it will be judged as
100%.
1 to 999 (%)
1173 dwlskp G04 skip
condition
Specify the skip signal for ending the G04 (dwell)
command.
Skip signals
Setting
SKIP3 SKIP2 SKIP1 SKIP0
0 × × × ×
1 × × × {
2 × × { ×
3 × × { {
4 × { × ×
5 × { × {
6 × { { ×
7 × { { {
8 { × × ×
9 { × × {
10 { × { ×
11 { × { {
12 { { × ×
13 { { × {
14 { { { ×
15 { { { {
Skip when { signal is input.
0 to 15
1174 skip_F G31 skip
speed
Specify the feedrate when there is no F command in
the program at G31 (skip) command.
1 to 999999
(mm/min)