Filter
Top Products
3. I/O Parameters
3.2 I/O Device Parameters
12
# Item Contents Setting range (unit)
9116
9216
9316
9416
9516
TIME-OUT (s) Set the time out time to detect an interruption in
communication.
The time out is not checked when 0 is set, so the
waiting time will be infinite.
The screens cannot be changed during the waiting
time.
Set this time to 10 as the standard.
0 to 30 (s)
9117
9217
9317
9417
9517
DR OFF Specify whether to check the DR data at the data
input/output.
0: DR valid
1: DR invalid
9118
9218
9318
9418
9518
DATA ASC II 0: Output in ISO/EIA code (Depends on whether
#9113, #9213, #9313, #9413, or #9513 EIA
output parameter is set up)
1: Output in ASC II code
0/1
9119
9219
9319
9419
9519
INPUT FORM Specify the mode for input (collation).
0: Standard input (Data from the very first EOB is
handled as significant information.)
1: EOBs following the first EOB of the input data
are skipped until data other than EOB is input.
0/1
9121
9221
9321
9421
9521
EIA CODE [ When outputting with the EIA codes, special ISO
codes not included in EIA can be output with
alternate codes.
For each special code, designate a code (as a
hexadecimal) that is not duplicated with existing EIA
codes.
(Continued on the next page.)
9122
9222
9322
9422
9522
]
9123
9223
9323
9423
9523
#
9124
9224
9324
9424
9524
∗
0 to FF (hexadecimal)