Filter
Top Products
8. Spindle Parameters
8.5 Supplement
268
(3) Setting the output scale
# No. Abbrev Parameter name
3455 SP255 DA1MPY D/A output channel 1 magnification
3456 SP256 DA2MPY D/A output channel 2 magnification
Usually, the standard setting value is set for the output scale (SV063, SV 064). When “0” is set, the
output will be made as well as when “256” is set.
SP255 10 [V]
DATA x
256
x
256 (8bit)
+ 5 [V] (offset) = Output voltage [V]
(Example) When outputting the position droop with 10°/V.
640000 671 10
65536
x
256
x
256
+ 5 = 5.999 [V]