Filter
Top Products
5. Base Specifications Parameters
55
# Items Details
Setting range (unit)
1271
(PR)
ext07
(bit7)
Cut amount
(For L
system only)
Specify the operation to be performed when the
program-specified cut amount exceeds the cut amount
of the final shaping program.
0: Conventional specifications
A program error occurs if the program-specified
cut amount exceeds the cut amount of the final
shaping program.
1: Extended specifications
Rough cutting is performed by one cut if the
program-specified cut amount exceeds the cut
amount of the final shaping program.
0/1
(Default: 0)
1272
(PR)
ext08
(bit1)
M function
synchronous
tap cycle
Specify whether to enable the M function synchronous
tap cycle.
0: Disable
1: Enable
0/1
1273
(PR)
ext09 Not used.
1274
(PR)
ext10 Not used.
1275
(PR)
ext11 Not used.
1276
(PR)
ext12 Not used.
1277
(PR)
ext13
(bit0)
Tool life
management
II count type
2
Specify how and when the mount or use count is
incremented in tool life management II.
0: Type 1
The count is incremented when the spindle is
used for cutting.
1: Type 2
The count is incremented for the tool used or
mounted for one program. The increment is
enabled by resetting.
0/1
(Default: 0)
1278
(PR)
ext14 Not used.
1279
(PR)
ext15 Not used.
1280
(PR)
ext16 Not used.
1281
(PR)
ext17 Not used.
1282
(PR)
ext18 Not used.
1283
(PR)
ext19 Not used.
1284
(PR)
ext20 Not used.
1285
(PR)
ext21 Not used.