Filter
Top Products
5. Base Specifications Parameters
46
# Items Details
Setting range (unit)
1220 aux04
(bit1)
Validity of
space code
in comment
Validate or invalidate the space code described in the
comment statements in the machining program in edit
operation with the custom display.
0: Invalidate the space code in the comment
statements of the machining program.
1: Validate the space code in the comment
statements of the machining program.
0/1
(Default: 0)
1221 aux05 Not used.
1222 aux06
(bit0)
Not used. 0
aux06
(bit1)
Not used. 0
aux06
(bit3)
Enable/disable
setup
parameter lock
Specify whether to enable the setup parameter lock
function.
0: Disable
1: Enable
0/1
aux06
(bit7)
Not used. 0
1223 aux07
(bit0)
Not used. 0
aux07
(bit1)
Not used. 0
aux07
(bit2)
Not used. 0
aux07
(bit3)
Not used. 0
aux07
(bit4)
Not used. 0
aux07
(bit5)
Not used. 0
aux07
(bit6)
Cancel
synchronous
tap (,S)
retract
0: Retains a spindle rotation speed (, S) when
performing synchronous tap retract.
1: Cancels a spindle rotation speed (, S) by retract
with G80.
0/1
aux07
(bit7)
Synchronous
tap method
Specify a synchronous tap method.
0: Synchronous tap (multi-step acceleration and
deceleration and rapid return)
1: Conventional type synchronous tap
0/1
1224 aux08 Unusable. Set 0 for this option.
1225 aux09
(bit7)
Enable/disable
spindle rotation
clamp
Specify whether to enable spindle rotation clamp by
the spindle rotation clamp command (G92S, Q) instead
of the spindle rotation command (R3210) specified by
the user ladder.
0: Enable
1: Disable
0/1