Filter
Top Products
5. Base Specifications Parameters
50
# Items Details
Setting range (unit)
1228 aux12
(bit0)
Switch
coordinate
value screen
Set up this option to switch the coordinate value
screen.
0: 80-character screen
1: 40-character screen
0/1
aux12
(bit1)
Switch offset
and
parameter
screen
Set up this option to switch the offset and parameter
screen to the parameter screen.
0: Displays the offset and parameter screen.
1: Displays the parameter screen.
0/1
aux12
(bit2)
Switch data
protection in
data
transmission
mode
Set up the range of data protection in data transmission
mode.
0: Protects both send and receive data.
1: Protects receive data only.
0/1
aux12
(bit3)
Nose R
specification
Select whether to specify the nose R compensation by
shape or wear number.
0: Specifies the nose R compensation by shape
number.
1: Specifies the nose R compensation by wear
number.
0/1
aux12
(bit4)
Select
operation
error or stop
code
Specify both block cutting start interlock and cutting
start interlock as the operation error or stop code.
0: Operation error
1: Stop code
0/1
aux12
(bit5)
Select
constant
surface
speed
coordinates
Select constant surface speed coordinates.
0: Workpiece coordinate value
1: Absolute coordinate value
0/1
aux12
(bit6)
Switch
relative
values
displayed
0: Includes coordinate preset amounts in relative
values (absolute values).
1: Does not coordinate preset amounts in relative
values (absolute values).
0/1
aux12
(bit7)
Protection
with manual
value
command
Set up this option to protect a manual value command.
0: Does not protect the manual value command
(same as before).
1: Protects the manual value command.
0/1
1229 set01
(bit0)
Subprogram
interrupt
0: Specifies the user macro interrupt of macro type.
1: Specifies the user macro interrupt of sub-program
type.
0/1
set01
(bit1)
Accurate
thread
cutting E
0: Address E specifies the number of threads per inch
for inch screw cutting.
1: Address E specifies precise reading for inch screw
cutting.
0/1