Filter
Top Products
Revision History
Date of revision Manual No. Revision details
Dec. 2000 BNP-B2267* First edition created.
Sep. 2003 BNP-B2267A
• The cover (front, spine, back covers) design was changed.
• "Type", "Independent Product Code" and "Reference No." were
added to the back cover.
• The following parameters were added.
(1) 5. Basic specification parameters
#1926 IP address #21025 SmpDelay
#1927 Subnet mask #21028 ed_mess
#1928 Gateway address #21029 NCname
#1929 Port number #21030 AlmHold
#21031 UnitMax
#21032 UnitNum
#21049 SPname
(2) 16. Indexing axis parameters (#26251 ~ )
(3) 17. Indexing axis position switch (#27701 ~ )
(4) 18 Indexing axis commands
• Mistakes, etc. were corrected.
Mar.2004 BNP-B2267C
• The contents revised following to the software Ver.C and Ver.D.
• Sections of servo parameters (section 7 to 9) were revised all
over, and reconstructed to “7. Servo Parameters”.
• Sections of spindle parameters (section 10 and 11) were
revised all over, and reconstructed to “8. Spindle Parameters”.
• “19 Auxiliary Axis Parameters” was revised all over and its
section number became “16”.
• Mistakes, etc. were corrected.